TRIM TABS FOR BOATS
Uflex Trim Tabs have been specifically designed for easy installation using a quick connect bracket-actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.
TRIM TAB MTC SYSTEM FEATURES
• Tab bracket with BALL JOINT
• Operating system with hardened steel ballscrew, suitable to withstand high push loads.
• Prompt and easy control with the innovative use of a Joystick (patented)
• AUTO-LINE UP: automatic flap re-alignment function when in neutral
• Completely sealed thermoplastic resin tab actuators: maximum protection guaranteed by dual seals and a rubber bellow (patented)
• Stainless steel rod and tabs
• The innovative profile of the HP tabs increases the efficiency of the system
• Non polished stainless steel tabs also available (standard & EM tabs only).
• Hole hinge design (patented) allows for precise retrofit replacement with Lenco® and Bennett® same size tabs
• Fully maintenance free
• Voltage:12V DC
• Waterproof: IP68 protection
• CE Certification
• Meets with the EN 60945 standards
TRIM TAB STANDARD COMPONENTS (SINGLE ACTUATOR PER TAB)
• 1 joystick control unit with 0.50 m (1.64’) wiring harness
• 1 pair of stainless steel tabs. Tabs are sold separately: specify selected size when ordering
TRIM TAB OPTIONAL COMPONENTS:
• 1 extension wiring harness kit for the power cable and the actuator cables. Deutsch plugs included
• 1 second station joystick-2 control unit with 0.50 m (1.64’) wiring harness
• 1 extension wiring harness (6 m and 9 m for second station). Deutsch plugs included.
• 1 extension wiring harness (2 m for auto-line up). Deutsch plugs included.
• 1 zinc alloy sacrificial anode kit to neutralize the galvanic currents on tabs ( 2 anode kits for every 1 pair tab installation)
| Label | Value |
|---|---|
| A | 228.6 mm (9") |
| B | 19.5 mm (0.77") |
| Ball Joint | TAB BRACKET WITH BALL JOINT |
| Joystick | Available |
| AUTOLINE UP - automatic flap re-alignment function | Yes |
| Actuators | THERMOPLASTIC RESIN - COMPLETELY SEALED |
| Tabs | stainless steel |
| Voltage | 12VDC |
| IP protection | IP68 |
| Certification | CE - EN60945 |
| Race application use | NOT ALLOWED |
MTC systems - Applications - These recommendations should be used as a general reference only. Final selection should be made with the assistance of a qualified installation technician. For any further information please contact our Thecnical Service
| BOAT LENGTH (') |
BOAT LENGTH (m) |
TAB SIZE L (tab length) x l (transom side) (") |
TAB SIZE L (tab length) x l (transom side) (cm) |
TRANSOM MINIMUM HEGHT - TILTED INSTALLATION |
TRANSOM MINIMUM HEGHT - VERTICAL INSTALLATION |
|---|---|---|---|---|---|
|
14’ - 18’ |
4,5 - 5,5 |
9” x 9” |
22,8 x 22,8 |
27.04 cm (10.65”) |
30.5 cm (12”) |
|
16’ - 25’ |
5,0 - 8,0 |
12” x 9” |
30,5 x 22,8 |
27.04 cm (10.65”) |
30.5 cm (12”) |
|
18’ - 30’ |
5,5 - 9,0 |
12” x 12” |
30,5 x 30,5 |
27.04 cm (10.65”) |
30.5 cm (12”) |
|
26’ - 36’ |
8,0 - 11,0 |
12” x 18” |
30,5 x 45,7 |
27.04 cm (10.65”) |
30.5 cm (12”) |
MTC systems - Applications - These recommendations should be used as a general reference only. Final selection should be made with the assistance of a qualified installation technician. For any further information please contact our Thecnical Service
| Model | Part Number | Description |
|---|---|---|
| MTC 12-CH - 12V DC | 43043M | 2 AC12 actuators, 12V DC + 1 chrome joystick |
| MTC 12-CH-LP - 12V DC | 43044P | 2 AC12 actuators, 12V DC + 1 chrome low profile joystick |
