The AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats.
They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc.
By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing.
In case of a power failure an emergency device allows for manual opening.
TECHNICAL FEATURES
• According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installation for heavier loads.
• Maximum load for single installations: 1200N (120 kg – 265 lbs)
• Maximum load for dual installations: 2400N (240 kg – 529 lbs)
• Maximum load is not to be exceeded.
• Supplied with all mounting hardware.
• Stainless steel telescopic ram for manual opening in case of emergency.
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
• IP 65 protection
• Speed: 25mm/sec no load applied, 17 mm/sec maximum load
• Current absorption in single installations: 10A at 12V, 5A at 24V
• Current absorption in dual installations: 20A at 12V, 10A at 24V
• AV 12VDC models are Ignition Protected. UL1500 – ISO8846 approved.
INSTALLATION
• The following equation will help you to calculate the maximum strength (Fmax) required from the hatch lifter to open your hatch, knowing the dimensions and weight of the hatch and the position of the mounting brackets.
Maximum load (Fmax):
1200 N (120 kg – 265 lbs) single installation, pushing only
2400 N (240 kg – 530 lbs) dual installation pushing only
Note: when the load exceeds 2400 N (240 kg – 530 lbs), it is possible to install more then two AV actuators. Please, contact our Technical Service for the proper electrical configuration
COMPONENTS DESCRIPTION
• nº 1 AV actuator for single installation (Fig.1)
• nº 2 AV actuators for dual installation (Fig.2)
• External diameter: 48 mm (1.9” )
• Maximum oscillation range: 125°
Fuse (not supplied)
Battery (not supplied)
OPTIONAL COMPONENTS:
RB12 – Relay box 12V
RB24 – Relay box 24V
RB Contain the relays needed for cycle revertion. One box works with single or dual installations
SW20 – 1 x 3 way single pole momentary switch
BR/AV – Spare fixing bracket
| Label | Value |
|---|---|
| Ram | Stainless Steel telescopic |
| Speed | 25mm/sec no load applied; 17 mm/sec maximum load; |
| Maximum load for single installations | 1200N (120kg - 265lbs) |
| Maximum load for dual installations | 2400N (240kg - 529lbs) |
| Current absorption in single installations | 10A a 12V; 5A a 24V |
| Current absorption in dual installations | 20A a 12V; 10A a 24V |
| External Ø | 48 mm (1.9") |
| Protection | IP65 |
| Ignition Protected. UL1500 - ISO8846 approved | Yes, for AV 12VDC models |
AV Series electrical Hatch lifters - technical features
| MODEL |
SKU |
VOLT |
STROKE |
LENGTH A (full closed actuator) |
External Ø |
|---|---|---|---|---|---|
|
AV 3012 |
40671C |
12V DC |
300 mm (12”) |
677 mm (26.6”) |
48 mm (1.9”) |
|
AV 3024 |
40672E |
24V DC |
300 mm (12”) |
677 mm (26.6”) |
48 mm (1.9”) |
|
AV 4512 |
40582D |
12V DC |
450 mm (18”) |
827 mm (32.5”) |
48 mm (1.9”) |
|
AV 4524 |
40583F |
24V DC |
450 mm (18”) |
827 mm (32.5”) |
48 mm (1.9”) |
|
AV 6012 |
40584H |
12V DC |
600 mm (24”) |
977 mm (38.4”) |
48 mm (1.9”) |
|
AV 6024 |
40585K |
24V DC |
600 mm (24”) |
977 mm (38.4”) |
48 mm (1.9”) |
AV Series electrical Hatch lifters - technical features
| Model | Part Number | Description |
|---|---|---|
| RB12 | 40738Y | Relay box 12V |
| RB24 | 40742C | Relay box 24V |
| SW20 | 69116J | 1 x 3 way single pole momentary switch |
| BR/AV | 80382I | Spare fixing bracket |
Clicking on the items will open a separate tab in the browser
Related Products
No results found.
